Power supply voltage: DC 24V
Pin 1 is connected to the battery positive pole, and pin 2 is connected to the battery negative pole.
3. 4 Pin the actuator.
Pin 5 is connected to the positive pole of the speed signal, and pin 6 is connected to the negative pole of the speed signal.
7. Pin 8 and pin 9 are connected to the external fine tuning potentiometer. Pin 7 and pin 9 are connected to both ends of the potentiometer and pin 8 is connected to the midpoint of the potentiometer.
Pin 10 and pin 7 are connected to both ends of the idle/running switch. When it is connected, it is idle, and when it is disconnected, it is running.
IDEL is the idle speed adjustment potentiometer. The clockwise rotation is the rise, and the reverse rotation is the drop.
RUN refers to the running adjustment potentiometer, with clockwise rotation as the rising and reverse rotation as the falling.
GAIN is a gain adjusting potentiometer, which has fast forward rotation reaction and good reverse rotation stability. It is recommended to adjust it between 7 grids.
DROOP is a speed regulation (speed droop) potentiometer (the speed DROOP can be controlled within the range of 0~5% under full load), and it is recommended to adjust it between 1 grid.
Power supply voltage: DC 24V
Pin 1 is connected to the battery positive pole, and pin 2 is connected to the battery negative pole.
3. 4 Pin the actuator.
Pin 5 is connected to the positive pole of the speed signal, and pin 6 is connected to the negative pole of the speed signal.
7. Pin 8 and pin 9 are connected to the external fine tuning potentiometer. Pin 7 and pin 9 are connected to both ends of the potentiometer and pin 8 is connected to the midpoint of the potentiometer.
Pin 10 and pin 7 are connected to both ends of the idle/running switch. When it is connected, it is idle, and when it is disconnected, it is running.
IDEL is the idle speed adjustment potentiometer. The clockwise rotation is the rise, and the reverse rotation is the drop.
RUN refers to the running adjustment potentiometer, with clockwise rotation as the rising and reverse rotation as the falling.
GAIN is a gain adjusting potentiometer, which has fast forward rotation reaction and good reverse rotation stability. It is recommended to adjust it between 7 grids.
DROOP is a speed regulation (speed droop) potentiometer (the speed DROOP can be controlled within the range of 0~5% under full load), and it is recommended to adjust it between 1 grid.
