Function Description:
The 3044196 speed controller adopts full electronic closed-loop control technology. It responds quickly and accurately to the instantaneous load change to control the speed of the engine. When connected to the matched EFC series electronic actuator and magnetic speed sensor signal, it can control the speed of the engine. CUMMINS engine. In design, it is easy to install and can be pre-adjusted, including speed regulation and working idle speed, to assist with input for multiple machines or special purpose machines, and to prevent reverse battery voltage, transient pulse voltage, actuator's Short circuit faults and safety protection in case of loss of speed sensor signal or power supply, etc.
Technical Specifications:
Speed stability is better than ±0.25%.
Speed range 1KHz ~ 6.5KHz .
Thermal stability ±0.7% max.
IDLE regulation 260 ±20Hz ~ 85% of rated speed.
DROOP regulation Minimum position is 15Hz ±6Hz / change in load current per amp Maximum position 400Hz ±75Hz / change in load current per amp.
External speed adjustment ±200Hz (external 1KΩ)
AUX input sensitivity 148Hz / 1V., ±10Hz.,
Impedance 1MΩ .
surroundings:
Operating temperature range -40℃ ~ 85℃
Operating humidity range up to 95%
Storage temperature -55℃ ~ 92℃
Vibration 20-100HZ 500mm/Sec.
Input Power: Supply voltage 12V and 24V DC battery system
Ground Polarity: Negative
Power consumption: 40mA
Actuator continuous current: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS .
Note: The above performance parameters are measured at the operating frequency of 3800Hz..
Function Description:
The 3044196 speed controller adopts full electronic closed-loop control technology. It responds quickly and accurately to the instantaneous load change to control the speed of the engine. When connected to the matched EFC series electronic actuator and magnetic speed sensor signal, it can control the speed of the engine. CUMMINS engine. In design, it is easy to install and can be pre-adjusted, including speed regulation and working idle speed, to assist with input for multiple machines or special purpose machines, and to prevent reverse battery voltage, transient pulse voltage, actuator's Short circuit faults and safety protection in case of loss of speed sensor signal or power supply, etc.
Technical Specifications:
Speed stability is better than ±0.25%.
Speed range 1KHz ~ 6.5KHz .
Thermal stability ±0.7% max.
IDLE regulation 260 ±20Hz ~ 85% of rated speed.
DROOP regulation Minimum position is 15Hz ±6Hz / change in load current per amp Maximum position 400Hz ±75Hz / change in load current per amp.
External speed adjustment ±200Hz (external 1KΩ)
AUX input sensitivity 148Hz / 1V., ±10Hz.,
Impedance 1MΩ .
surroundings:
Operating temperature range -40℃ ~ 85℃
Operating humidity range up to 95%
Storage temperature -55℃ ~ 92℃
Vibration 20-100HZ 500mm/Sec.
Input Power: Supply voltage 12V and 24V DC battery system
Ground Polarity: Negative
Power consumption: 40mA
Actuator continuous current: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS .
Note: The above performance parameters are measured at the operating frequency of 3800Hz..
