● The user can switch the LCD display interface in Chinese or English;
● The controller can monitor, warn and shut down the operation status and fault conditions of the unit;
● Users can set various parameters of the controller on the panel according to the needs of the unit (such as current transformer, number of flywheel teeth, idle time, etc.);
● Users can connect with PC through RS232 or USB special communication interface to configure various control working modes, set parameters and monitor;
● 6 fully settable auxiliary inputs (user-defined) and 6 auxiliary outputs, which can be used for starting, alarming, stopping and other functions;
● The user can use the expansion module to provide multiple expansion I/O functions as required;
● Start and stop the generator set automatically (the controller is in the "automatic" mode). When the mains voltage is cut off (install the mains power off relay, and select an auxiliary input to monitor the availability of mains power), the unit will start automatically, and then supply power to the load. If the mains power returns, the unit will stop, and the mains power will supply power to the load.
● The user can switch the LCD display interface in Chinese or English;
● The controller can monitor, warn and shut down the operation status and fault conditions of the unit;
● Users can set various parameters of the controller on the panel according to the needs of the unit (such as current transformer, number of flywheel teeth, idle time, etc.);
● Users can connect with PC through RS232 or USB special communication interface to configure various control working modes, set parameters and monitor;
● 6 fully settable auxiliary inputs (user-defined) and 6 auxiliary outputs, which can be used for starting, alarming, stopping and other functions;
● The user can use the expansion module to provide multiple expansion I/O functions as required;
● Start and stop the generator set automatically (the controller is in the "automatic" mode). When the mains voltage is cut off (install the mains power off relay, and select an auxiliary input to monitor the availability of mains power), the unit will start automatically, and then supply power to the load. If the mains power returns, the unit will stop, and the mains power will supply power to the load.
